Australia, Featured Writer, Health & Safety, Industry News, Tips & Resources

4 ways to make your WHS Reporting stand out

GRC - INX Software

One of the key deliverables for safety professionals is providing accurate and useful reporting on monthly safety performance to employees, managers, boards and outside of your organisation. But what should you include in these reports? Safe Work Australia have a detailed publication that provides some example templates and advice that we thought we might distill down to the key points and share with you in this post.

Reporting to Employees

When we communicate work health and safety (WHS) information to employees, we generally aim to deliver a message of encouragement to reduce workplace injuries often accompanied with a message of ‘towards zero’. So the focus is on the information on hazards and risks that have emerged as the key areas of concern or focus for the month.

Controlling these hazards is key information and is often in the form of alerts and reminders of expectations from employees to change or improve their behaviour. Often this information is delivered frequently and immediately after a concern has been raised or a risk has been identified through tool-box sessions or via one-on-one discussions between staff and their supervisors.

From time to time, specific training for the staff is delivered to increase knowledge e.g. Hazard awareness training. Other means of reporting to employees are through email notifications, posters, noticeboards and the publication of annual reports.

It is most important here that workplace safety expectations are clearly articulated and safety messages displayed, to promote safe behaviour. Employees should not be left guessing and there should be regular updates to help to promote the safety message. Simply relying on one-off safety training, for example, the safety induction, is not enough.

Reporting to Management

Reporting to management requires the safety professional to consider what data is useful to this group in order to make informed decisions towards improvement. Measurement is key, but it is important to consider the statistical validity and the costs associated with collecting data to measure performance.

Monthly reports generally contain information about the number of injuries that have occurred in that month and their severity. Displaying this graphically against categories of Plant/Equipment Damage, Near Miss, Injury/Disease, Exposure, Environmental Damage and No Injury is typical. Useful graphs include those that show the:

  • Event Severity Rating,
  • Number and type of events,
  • Percentage of opportunity for improvements,
  • Number of events per 1000 staff,
  • Breakdown per agency,
  • Injury severity rating, and
  • Mechanisms of injury.

Reporting to the Board of Directors

1. Risk Profile

Directors must be apprised of specific and significant changes in work health and safety regulation, technologies, practices and organisational hazards and risks. The likely impact on WHS due to significant structural change, financial constraints, growth or downsizing, should be discussed. Inspections, audits, incident analysis, legal, WHS and news sources should be scanned and used to inform these discussions.

2. WHS Position

The WHS Position of the organisation is the status of risks, controls and residual risk regarding the implementation and effectiveness of WHS policy and strategy, including those relating to the allocation of financial and human resources.  It is here that you summarise the organisation’s success in meeting its obligations to ensure workers’ health and safety. Critical here are KPIs relating to both lead and lag indicators of critical risk-control activities that seek to eliminate or minimise the WHS risk or reflect event reports that remain unresolved at the end of the month.

3. WHS Performance

The actual number of injury cases by severity should be reported. Information about the actions taken to identify and eliminate hazards/minimise risk should be included. Activity and outcome details for internal or external performance audits and inspections help to identify ‘opportunities for improvement’. Finally, fines and penalties and updates on legal fees, workers’ compensation and medical costs relating to Class 1 injury or illness should be reported.

4. WHS Assurance

Discuss lead and lag indicators of selected critical risk-control activities, focusing primarily on significant changes and new risks. Include activity and outcome details for internal or external compliance audits and safety inspection conformance.

Reporting Outside the Organisation

Annual and Sustainability Reports

Annual reports should include the number of fatalities and the number of non-fatal Class 1 (LTIs), Class 2 (MTIs) and Class 3 (First Aid) injuries. The circumstances and consequences of each Class 1 injury or illness should be supported with a statement about the action taken to prevent recurrence.

The number of incident investigations should be reported with a discussion around the hazards/risks associated with the most potentially damaging injuries or illnesses and those associated with the most frequently occurring injuries.

The number of actions using hazard elimination controls versus the number of risk-minimising controls versus the number of risk-reducing/administrative controls should be reported as a HOC rating or score. Comment on the programs and/or processes used to manage the risks identified and include evidence of their effectiveness.

The report should provide independent internal audit results, external investigations by the regulator, fines, costs, the number of compensated injuries, and the total lost time. These reports may also include WHS lead and lag KPI’s relating to critical WHS risk controls and 5-year average or industry average comparative data.

Finally, a brief overview of WHS governance arrangements can be included, outlining structures and mechanisms by which assurance in relation to the implementation and effectiveness of WHS policies and controls is obtained.


More Info

Want to see how Tap Into Safety can make your workplace safety training engaging? Try a free demo today.



Dr. Susanne Bahn, Director and CEO, Tap into Safety

With over 11 years’ consultancy and 9 years’ research including more than 50 published journal articles, Sue knows her way around safety in hazardous workplaces. Her specific expertise focuses on induction deafness, risk blindness and risk management. A passionate individual, Sue is on a mission to lift the safety standard across Australia and internationally. Her qualifications include a PhD (Business – Health and Safety Management), a Masters in Human Resource Management, a Bachelor of Education and a Graduate Certificate in Higher Education. In July 2017 Sue was appointed as a panel member of the Reserve Bank of Australia’s Small Business Finance Advisory Panel. This appointment is an exciting opportunity to provide the Bank with valuable information on the financial and economic conditions faced by small businesses throughout Australia.

Follow Susanne on LinkedIn >


Want to know more? Then don’t hesitate to get in touch with us >


INX Software - Social Media - Share

Be informed of the latest industry news, key updates and our product and version releases, by following us on LinkedInFacebook, and Twitter. You can also get them delivered straight to your mailbox here.


Our Solutions: 


Originally published on Tap into Safety


Previous ArticleNext Article